News

Torque adjustment method of tapping chucks

&Nbsp;     tapping chucks with torque protection function. Shell joins Chuck spindle tapping machine in the middle of the core clamping of taps. Core and shell are joined, but by spring blade locking.
     torque control method:
      1. torque is too big: tapping machines attack will not slip off tap, indicating too much torque, tapping machines down the clamp torque. Remove the circlip, counter-clockwise loosening, M8 or above can be placed in the screw on the fixture, install circlip (very important, not installed, will loose for some time, torque and smaller).
      2. torque is too small: tapping machines tapping spindle will turn, but taps impregnable, that torque is too small, tapping Collet torque to turn up. Remove the circlip, clockwise screw, M8 or above can be placed in the screw on the fixture, install circlip (very important, without, for a period of time will loose, torque and smaller).
BACK